TM 9-2350-261-20-1
ENGINE RUNS ROUGH, STALLS, OR DOES NOT PUT OUT FULL POWER
0013 00
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Wiping rag (WP 0782 00, Item 76)
Suitable container
Personnel Required
Unit Mechanic
Helper (H)
References
See your -10
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
Air cleaner element cleaned (see your -10)
Primary and secondary fuel filters serviced
(see your -10)
Trim vane lowered (see your -10)
Power plant access door open (see your -10)
Power plant rear access panels removed (see your -10)
Rear compartment floor plates removed (WP 0436 00,
WP 0437 00, WP 0438 00, WP 0440 00, or
WP 0441 00)
T
CAUTION
Keep return hose clear of generator drive belts.
1.
Ensure manual shutoff valve is open (see your -10).
2.
Push forward on quick disconnect coupling (1) to disconnect
return hose (2) from fuel return line (3).
3.
Pull return hose (2) with quick disconnect coupling (1) out of
power plant compartment. Remove half of quick disconnect
coupling (1) from return hose (2), and retain.
001300-1