TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 170 of 346

TM 9-2350-261-20-1

CHARGING SYSTEM MALFUNCTIONS — Continued

0018 00

5Y

1.

Measure resistance between engine harness plug C8 (1)

and plug C3 (2), sockets D (3) to pins B (4), C (5) to C (6),

B (7) to D (8), and E (9) to E (10).

2.

Does multimeter read 0 ohms each time?

5YN

1.

Repair/replace engine harness

(WP 0312 00).

2.

Verify no faults found.

6Y

1.

Install engine harness plug C8 on generator jack.

2.

Remove engine wiring harness plug C3 (1) from bulkhead jack

(2) and plug C4 (3) from regulator jack C4 (4).

3.

Inspect engine harness plug C3 (1), bulkhead jack (2), front main

plug C4 (3), and regulator jack C4 (4) for corrosion and damage.

4.

Are plugs and jacks in clean and good condition?

6YN

1.

Repair/replace front main

wiring harness and/or regulator

(WP 0312 00 and WP 0230 00).

2.

Verify no faults found.

001800-3