TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 317 of 346

TM 9-2350-261-20-1

TRANSMISSION OIL HI TEMP INDICATOR MALFUNCTIONS — Continued

0052 00

CY

1.

Remove TRANS OIL HI TEMP indicator cover lens,

gasket, bulb, and gasket.

2.

Measure voltage between indicator assembly center

contact and ground.

3.

Does multimeter read less than 17 volts?

CYN

GO TO

DY

(PAGE 0052 00-6)

C2Y

1.

Remove jumper wire and install engine harness circuit 327

plug on trans oil hi temp switch.

2.

Remove front main harness circuit 327/27G plug (1) from

TRANS OIL HI TEMP indicator assembly jack (2).

3.

Measure voltage between front main harness circuit 327/27G

plug (1) circuit 27G pin and ground.

4.

Does multimeter read less than 17 volts?

C2YN

1.

Replace TRANS OIL HI TEMP

indicator assembly (WP 0251 00).

2.

Verify no faults found.

005200-4