TM-9-2350-261-20-1

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 1 OF 4

TM-9-2350-261-20-1 - Page 319 of 346

TM 9-2350-261-20-1

TRANSMISSION OIL HI TEMP INDICATOR MALFUNCTIONS — Continued

0052 00

DY

1.

Turn MASTER SWITCH to OFF (see your -10).

2.

Remove front main harness circuit 327/27G plug (1) from

TRANS OIL HI TEMP assembly jack (2).

3.

Measure resistance between front main harness circuit 327/27G

plug (1) circuit 327 pin and ground.

4.

Does multimeter read more than 0 ohms?

DYN

1.

Remove jumper cable and install

circuitplugontranshioiltemp

switch.

2.

Replace TRANS OIL HI TEMP

indicator assembly (WP 0251 00).

3.

Verify no faults found.

D2Y

1.

Install TRANS OIL HI TEMP indicator cover lens,

gasket, bulb, and gasket.

2.

Remove engine harness plug (1) from front main harness

jack (2) at carrier bulkhead.

3.

Measure resistance between engine harness plug (1)

pin G (3) and ground.

4.

Does multimeter read more than 0 ohms?

D2YN

1.

Remove jumper wire and install

engine harness circuit 327 plug on

trans oil hi temp switch.

2.

Repair front main harness circuit

327 (WP 0312 00).

3.

Verify no faults found.

005200-6