TM 9-2350-261-20-1
ENGINE OIL LOW PRESSURE INDICATOR MALFUNCTIONS — Continued
0051 00
AY
1.
Remove engine harness plug (1) from front main harness
jack (2) at carrier bulkhead.
2.
Is ENGINE OIL LOW PRESSURE indicator still on?
AYN
1.
Repair engine harness circuit 34
(WP 0312 00).
2.
Verify no faults found.
A2Y
1.
Remove ENGINE OIL LOW PRESSURE indicator cover
lens (1), gasket (2), bulb (3), and gasket (4).
2.
Remove front main harness circuit 27J/34 plug (5) from ENGINE
OIL LOW PRESSURE indicator jack (6).
3.
Measure resistance between indicator jack (6) pins and
ground, one at a time.
4.
Did multimeter read less than infinity for either measurement?
A2YN
1.
Repair front main harness circuit
34 (WP 0312 00).
2.
Notify supervisor.
A3Y
1.
Replace ENGINE OIL LOW PRESSURE indicator light
assembly (WP 0251 00).
2.
Verify no faults found.
005100-2