TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 296 of 1008

TM 9-2350-261-20-2

REPLACE DISTRIBUTION BOX ASSEMBLY FOR 200 AMP GENERATOR SYSTEM

(M113A2 AND M1064 ONLY) — Continued

0270 00

2.

Install new grommet (5) and circuit 400 lead (6) in distribution box (3).

NOTE

If bilge pump circuit breakers were removed, see WP 0327 00 for installation. If bilge pump

circuit breakers were not removed, go to Step 5.

3.

Connect circuit 450C lead (7) to circuit breaker (8).

4.

Connect circuit 450A lead (9) to circuit breaker (10).

5.

Install new grommet (11) and circuit 450B lead (12) in distribution box (3). Connect circuit 450B lead to circuit

breaker (8).

6.

Install grommet (13) and circuit 450 lead (14) in distribution box (3). Connect circuit 450 lead to circuit breaker (10).

7.

Install new grommet (15) and circuit 2 lead (16) in distribution box (3).

8.

Install new grommet (17) and circuit 2A lead (18) in distribution box (3).

9.

Install circuit 450C lead (7) on bus bar (19). Secure with new lockwasher (20) and screw (21).

10. Install new grommet (22) and circuit 49 lead (23) in distribution box (3). Install circuit 49 lead on bus bar (19). Secure

with new lockwasher (24) and screw (25).

0270 00-4