TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 605 of 1008

TM 9-2350-261-20-2

REPLACE TRANSMISSION TO OIL COOLER HOSE AND FITTINGS — Continued

0338 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Applyathin

,evencoatofsealingcompoundtoexternal threads of fittings before installation.

2.

Install new preformed packing (1) on elbow (2). Tighten jamnut (3). Use adjustable wrench.

3.

Install elbow (2) in transmission (4).

4.

Install bushing (5) in oil cooler (6). Use pipe wrench.

5.

Install tee (7) on bushing (5).

6.

Install elbow (8) on tee (7).

7.

Install transmission high oil temperature switch (9) in tee (7).

8.

Connect circuit 327 lead (10) to switch (9).

9.

Connect hose (11) to elbow (2) and elbow (8).

033800-3