TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 612 of 1008

TM 9-2350-261-20-2

REPLACE TRANSMISSION VENT AND FILLER TUBE — Continued

0340 00

3.

Disconnect and remove vent tube (3) from elbow (4) and elbow (5).

4.

Remove elbow (4) from transmission (6).

5.

Remove elbow (5) from filler tube (2).

6.

Remove screw (7), tab washer (8), and filler tube (2) from engine oil filter bracket (9). Discard tab washer.

7.

Loosen filler tube nut (10). Remove filler tube (2) from transmission (6).

CLEAN, INSPECT, AND REPAIR

1.

Clean parts with cleaning compound.

2.

Check vent tube, filler tube, and dipstick. Replace cracked or bent tubes or dipstick.

3.

Check fittings. Replace fittings that are cracked or have stripped threads.

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply a light coat of sealing compound to cleaned threads of fittings before installation.

2.

Install filler tube (2) in transmission (6). Tighten filler tube nut (10) finger tight.

3.

Place filler tube (2) against engine oil filter bracket (9).

4.

Apply antiseize compound to threads of screw (7). Secure filler tube (2) to bracket (9) with screw (7) and new tab

washer (8).

0340 00-2