TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 20 of 932
TM 9-2350-261-20-3
REPLACE REAR TIEDOWN PLATES — Continued
0417 00
INSTALLATION
WARNING
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
1.
Install two plates to bottom of carrier.
a.
Apply a light coat of sealing compound primer and sealing compound to the threads of the 12 screws (1).
b.
Install two plates (2) and coated screws (1) to bottom of carrier.
2.
TIGHTEN 12 SCREWS (1) TO 268-295 LB-FT (363-400 N·M) TORQUE. Use torque wrench.
END OF TASK
0417 00-2
Back to Top
