TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 28 of 932
TM 9-2350-261-20-3
REPLACE TOW CABLE PAD — Continued
0420 00
INSTALLATION
WARNING
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
1.
Apply a thin coat of adhesive to hull and back of new pad (1).
2.
Allow adhesive to dry for 10 to 20 minutes. Surface should be tacky, but not too sticky.
3.
Position pad (1) on hull surface and press firmly in place.
FOLLOW-THROUGH STEPS
1.
Install tow cable (see your -10).
END OF TASK
0420 00-2
Back to Top
