TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 32 of 932
TM 9-2350-261-20-3
REPAIR TRIM VANE — Continued
0422 00
ASSEMBLY
1.
Install release assembly (6) in trim vane (2). Secure with two plates (5), six screws (7), and new locknuts (8).
2.
Install upper stiffener (1) on trim vane (2). Secure with five screws (3) and new locknuts (4).
3.
Install lower stiffener (19) on trim vane (2). Secure with seven screws (20) and new locknuts (21).
4.
Install two hinges (22) on lower stiffener (19). Secure with two screws (23) and new locknuts (24).
5.
Install three bumpers (16) on trim vane (2). Secure with three washers (17) and new locknuts (18).
6.
Install guard (9) on vane (2). Secure with four screws (10), washers (11), and new locknuts (12).
7.
Install two screws (15), washers (14), and bumpers (13).
FOLLOW-THROUGH STEPS
1.
Install trim vane (WP 0421 00).
END OF TASK
0422 00-2
Back to Top
