TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 21 of 932
TM 9-2350-261-20-3
REPLACE TOWING HOOK AND EYE PAD
0418 00
THIS WORK PACKAGE COVERS:
Removal (page 0418 00-1).
Installation (page 0418 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Torque Wrench (WP 0780 00, Item 103)
Personnel Required
Unit Mechanic
Equipment Condition
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
REMOVAL
1.
Remove clip (1) and pin (5) that secure hook (2) in eye pad (3). Remove hook.
2.
Remove six screws (4) that secure eye pad (3) to carrier. Remove eye pad.
041800-1
NOTE
Rear eyes on ramp are old style; they are removed and installed the same way. The new style
eye is for tie-down of the carrier without shackles. Only the front requires the new style eyes.
Back to Top
