TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 212 of 932

TM 9-2350-261-20-3

REPAIR CARGO HATCH LATCH (M901A1 ONLY) — Continued

0469 00

ASSEMBLY

1.

Install housing (3) on hatch. Secure with four washers (8), new lockwashers (9), and bolts (7).

2 .

TIGH TEN F OU R BOLTS (7 ) TO 12 0-1 44 LB-IN ( 1

4

– 16 N·M) TO RQUE. Use torque wrench.

3.

Install disk (6), spring (5), and shoulder pin (4) on housing (3).

4.

Install shouldered stud (2) on housing (3).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

5.

Apply sealing compound to knob (1).

6.

Install knob (1) on handle (2) and housing (3).

0469 00-2