TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 225 of 932

TM 9-2350-261-20-3

REPLACE SIDE ARMOR (M901A1 ONLY)

0474 00

THIS WORK PACKAGE COVERS:

Removal (page 0474 00-1).

Installation (page 0474 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Torque Wrench (WP 0780 00, Item 103)

Materials/Parts

Lockwasher (4)

Lockwasher (5)

Spring pin (2)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

REMOVAL

NOTE

Right and left side armor are replaced the same way. Left side shown.

1.

Remove quick release pin (1) and place armor plate (2) in the down position.

2.

Remove four screws (3), lockwashers (4), washers (5), two brackets (6), and armor plate (2) from deck. Discard

lockwashers.

3.

Remove two spring pins (7) and shoulder pins (8) from brackets (6) and armor plate (2). Discard spring pins.

4.

Remove five screws (9), lockwashers (10), washers (11), and armor plate (12) from deck. Discard lockwashers.

047400-1