TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 458 of 932

TM 9-2350-261-20-3

REPLACE WINDSHIELD STOWAGE BRACKET (M1064 ONLY) — Continued

0542 00

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

If removed, apply thin coat of adhesive to pad and mounting surface. Press pads (9), (10), and (11) firmly in place

on bracket (3) or pads (8) on retainer (4).

2.

Place strap (7) on bulkhead bracket. Secure with pin (6) and new cotter pin (5).

3.

Align retainer (4) and bracket (3) on rear bulkhead. Secure with four washers (2) and screws (1).

END OF TASK

0542 00-2