TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 462 of 932

TM 9-2350-261-20-3

REPLACE MORTAR BASE STOWAGE BRACKET (M1064 ONLY) — Continued

0544 00

3.

Remove locking pin assembly (8) from mounting bracket (3).

4.

Remove two screws (9), flat washers (10), rubber bumper (11), and three spacers (12) from mounting bracket (3).

5.

Remove locknut (13), lockwasher (14), flat washer (15), and control handle (16) from mounting bracket (3). Discard

locknut and lockwasher.

INSTALLATION

1.

Install control handle (16), flat washer (15), new lockwasher (14), and new locknut (13) on mounting bracket (3).

2.

Install three spacers (12), rubber bumper (11), two screws (9), and flat washers (10) on mounting bracket (3).

3.

Install locking pin assembly (8) on mounting bracket (3).

0544 00-2