TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 298 of 767

TM 9-2350-261-20-4

REPLACE SMOKE GENERATOR ASSEMBLY AND SUPPORT BRACKET

(M1059 ONLY) — Continued

0697 00

INSTALLATION

1.

Position generator support bracket (8) on hull top. Secure with four screws (6) and new lockwashers (7). TIGHTEN

SCREWS TO 54-59 LB-FT (73-80 N·M) TORQUE. Use torque wrench.

WARNING

Hanging loads, heavy parts, and overhead equipment can fall unexpectedly and kill or injure

you.

Stay clear of hanging loads, heavy parts, and overhead equipment. Use correct lifting devices.

Always have helper guide heavy parts and equipment.

2.

Using a suitable lifting device, install smoke generator on armor shield.

3 .

Con nect glow plug cable (19) to preheat harness j

ack (2 0) to panel ( 21) on smo ke generato r.

4.

Connect fuel supply hose (5) to fuel supply connector (22) and fuel return hose (24) to fuel return connector (23).

5.

Connect fog oil hose (9) to cover assembly connector (10).

6.

Connect air hose (11) to cover assembly connector (12).

7.

Connect electrical cable assembly (13) to cover connector 5J1 (14).

8.

Slide generator on to s up port bracket (4 ).

Have helper assist.

9.

Secure generato r to support (4) with tw o scr

ews (1 5), wedg es (16), f our washers ( 17), and two new lockn uts (1 8).

069700-5