TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR SYSTEM POWER SUPPLY CABLE
ASSEMBLY (M1059 ONLY) — Continued
0699 00
1.
Disconnect cable assembly (1) from control panel assembly connector 1J1 (2).
2.
Remove screw (3), two washers (4), lockwasher (5), locknut (6), and ground lead (7) from hull bracket. Discard
lockwasher and locknut.
3.
Remove screw (8), nut (9), and cable assembly (1) from positive battery terminal (10).
4.
Remove cable assembly (1) and grommet (11) from battery box (12). Discard grommet.
5.
Remove six screws (13), lockwashers (14), and 12 clamps (15) from cable assembly (16). Discard lockwashers.
6.
Remove two screws (17), lockwashers (18), clamps (19), and cable assembly (16) from hull. Discard lockwashers.
0699 00-2