TM 9-2350-261-20-4
REPLACE SMOKE GENERATOR CONTROL PANEL ASSEMBLY (M1059
ONLY) — Continued
0698 00
REMOVAL
WARNING
Before you do any maintenance, discharge all capacitors to ground or electrical shock could
injure personnel.
NOTE
Tag all cables to match their respective connectors before removal.
1.
Disconnect six cable assembly plugs (1) from control panel (2). Install associated dust caps (3).
2.
Remove four screws (4), lockwashers (5), eight washers (6), four locknuts (7), and control panel (2) with two attached
brackets (9) and (11) from two brackets (8) and (10). Discard lockwashers and locknuts.
3.
Remove eight screws (12), lockwashers (13) and two brackets (9) and (11) from control panel (2). Discard lockwashers.
4.
Remove four screws (14), washers (15), and two brackets (8) and (10) from carrier.
0698 00-2