TM 9-2350-261-20-4
REPLACE APIU RACK MOUNT AND BRACKET (M1068 ONLY)
0725 00
THIS WORK PACKAGE COVERS:
Removal (page 0725 00-1).
Installation (page 0725 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Materials/Parts
Locknut (16)
Personnel Required
Unit Mechanic
Curbside data panel assembly A12 removed
(WP 0716 00)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
1.
Remove four locknuts (1), screws (2), and receptacle (3) from bracket (4). Discard locknuts.
2.
Remove two screws (5), locknuts (6), four washers (7), clamp (8), and bracket (4) from APIU rack (9). Discard locknuts.
3.
Remove four screws (10), washers (11), locknuts (12), and mount (13) from APIU rack (9). Discard locknuts.
4.
Remove two locknuts (14), screws (15), spacers (16), washers (17), and hanger (18) from bulkhead mount (19) and
rack (9). Discard locknuts.
5.
Remove three locknuts (20), screws (21), six washers (22), and rack (9) from three bulkhead mounts (19). Discard
locknuts.
072500-1
Engine stopped (see your -10)
Carrier blocked (see your -10)
All external power disconnected
(TM 11-7010-256-12&P)
Electronic communication equipment removed
(TM 11-7010-256-12&P)
E
n
q
o
u
i
i
t
p
i
m
d
e
n
n
o
t C