TM 9-2350-261-20-4
REPLACE ROADSIDE DATA PANEL ASSEMBLY A13 AND
BRACKET (M1068 ONLY)
0727 00
THIS WORK PACKAGE COVERS:
Removal (page 0727 00-1).
Installation (page 0727 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
Radio Equipment Tool Kit (WP 0780 00, Item 81)
Materials/Parts
Locknut (2)
Personnel Required
Signal Support System Specialist 31U10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
All external power disconnected (TM 11-7010-256-
12&P)
Battery ground lead disconnected (WP 0294 00)
REMOVAL
NOTE
Tag all cables before removal for installation later.
1.
Disconnect five cables (1) from roadside data panel assembly (2).
2.
Remove two screws (3), locknuts (4), four washers (5), and roadside data panel assembly (2) from mounting bracket (6).
Discard locknuts.
3.
Remove two screws (7), washers (8), and mounting bracket (6) from extension base (9).
4.
Remove two cables (10) from roadside data panel assembly (2).
072700-1