TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 428 of 767

TM 9-2350-261-20-4

REPLACE POWER CONTROL ENCLOSURE ASSEMBLY A1 (M1068 ONLY)

0731 00

THIS WORK PACKAGE COVERS:

Removal (page 0731 00-1).

Installation (page 0731 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Lockwasher (2)

Personnel Required

Power-Generation Equipment Repairer 52D10

Helper (H)

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

All external power disconnected (TM 11-7010-256-

12&P)

Battery ground lead disconnected (WP 0294 00)

Roadside data panel A13 removed (WP 0727 00)

Cascade remote harness W15 removed (WP 0745 00)

REMOVAL

1.

Remove two screws (1), lockwashers (2), and bracket (3) from power control enclosure (4). Discard lockwashers.

NOTE

Tag all cables/connectors before removal for proper installation later.

2.

Disconnect all cables/connectors (5) from left and right sides of power control enclosure (4).

3.

Remove eight screws (6), washers (7), and power control enclosure (4) from inverter housing (8). Have helper assist.

073100-1