TM-9-2350-261-20-4

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4

TM-9-2350-261-20-4 - Page 419 of 767

TM 9-2350-261-20-4

REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND BRACKET

(M1068 ONLY) — Continued

0730 00

NOTE

Tag all leads before removal. There are 12 circuit breakers. All circuit breakers are removed

in the same way. The art work shows the removal of only one circuit breaker. Use wiring

diagram (see FO-7).

5.

Remove nut (1) and safety cover (2) from terminal 1 of circuit breaker CB1 (3). Unwrap velcro strap (4) from around

local wiring.

6.

Remove two nuts (5) and lockwashers (6) from circuit breaker CB1 (3).

7.

Remove circuit 7A lead (7) from terminal 1 of circuit breaker CB1 (3).

8.

Remove circuits 9A, 9E, and 9D leads (8) from terminal 2 of circuit breaker CB1 (3).

9.

Remove two screws (9), lockwashers (10), and circuit breaker CB1 (3) from faceplate (11). Discard lockwashers.

10. Remove two nuts (12) and lockwashers (13) from circuit breaker CB2 (14).

11. Remove circuit 31B lead (15) from terminal 1 of circuit breaker CB2 (14).

12. Remove circuit 36C lead (16) from terminal 2 of circuit breaker CB2 (14).

13. Remove four screws (17), lockwashers (18), and circuit breaker CB2 (14) from faceplate (11). Discard lockwashers.

14. Remove four screws (19), locknuts (20), and cascade remote harness RP1 (21) from faceplate (11) and two inverters.

Discard locknuts.

0730 00-2