TM-9-2350-261-20-4
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 4 OF 4
TM-9-2350-261-20-4 - Page 618 of 767
TM 9-2350-261-20-4
COMMON TOOLS AND SUPPLEMENTS AND SPECIAL
TOOLS/FIXTURES LIST
0780 00
INTRODUCTION
Scope
This work package lists all common tools, supplements and special tools/fixtures needed to maintain the M113A2, M577A2,
M901A1, M1059, M1064, and M1068 carriers.
Common and special tools for the 120-mm (4.7-inch) M298 mortar, mortar mounts, and turntables are listed in TM
9-1015-250-23.
Explanation of Columns
Column (1) — Item Number.
This number is assigned to the entry in the listing and is referenced in the Initial Setup section of
the task under Tools to identify the item (e.g., “Torque wrench, (WP 0780 00, Item 105)”).
Column (2) — Name.
This column lists the item by noun nomenclature and other descriptive features (e.g., “Wrench set,
socket, 1/4 inch drive”).
Column (3) — National Stock Number.
This is the National Stock Number (NSN) assigned to the item; use it to requisition
the item.
Column (4) — Part Number.
Indicates the primary number used by the manufacturer (individual, company, firm, corporation,
or Government activity), which controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
Column (5) — Reference.
This column identifies the authorizing Supply Catalog (SC) or Repair Parts and Special Tools
List (RPSTL) for items listed in this appendix.
Table 1. Tool Identification List
(1)
(2)
(3)
(4)
(5)
ITEM
NO.
ITEM NAME
NATIONAL STOCK
NUMBER
PART NUMBER
REFERENCE
1
ADAPTER
11592843
TM 9-2350-261-24P
2
ADAPTER, SPDL, SANDER
CP-50
SC4910-95-CL-A74
3
ADAPTER, SOCKET, TORQUE
A-A-2172
SC4910-95-CL-A72
4
ADAPTER, SOCKET, TORQUE, 1/2 TO
3/8 INCH DRIVE
A-A-2172
SC4931-95-CL-A22
5
ADAPTER, SOCKET, WRENCH, 3/4 X
1/2 INCH
11655788-3
SC4931-95-CL-A22
6
ADAPTER, TORQUE WRENCH, 7C
U-JOINT
11663358-1
TM 9-2350-261-24P
7
ADAPTER, TORQUE WRENCH, 6C
U-JOINT
11663358-2
TM 9-2350-261-24P
8
ADAPTER, TORQUE WRENCH, 1/2
INCH DRIVE 9/16 INCH
10917666
TM 9-2350-261-24P
9
ADAPTER, TORSION BAR
12251805
TM 9-2350-261-24P
10
ADJUSTING TOOL, STEER
CENTERING
J35223
TM 9-2350-261-24P
11
BAR, LIFTING, FINAL DRIVE
11589384
TM 9-2350-261-24P
078000-1
Back to Top
