TM-9-2350-261-34
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-261-34 - Page 113 of 785
TM 9-2350-261-34
SERVICE UPON RECEIPT — Continued
0013 00
0013 00-2
Checking Equipment
1.
Perform all operator and unit PMCS. See your -10 and -20. M901A1 Turret PMCS is included in TM 9-2350-259-10
and TM 9-2350-259-20.
2.
Inspect the equipment for damage incurred during shipment. If the equipment has been damaged, report the damage on
Form SF 368 (Quality Deficiency Report).
END OF TASK
Service final drives with operational lubricant. See your PMCS.
Hull
Final drives
Hull
Personnel heater/feed
line
Service transmission with operational lubricant. See
transmission tag on filler neck and your PMCS.
Transmission
Power Plant
Compartment
Change engine oil. See engine crankcase tag on filler neck and
your PMCS.
Engine
Power Plant
Compartment
For level A deprocessing, perform the following procedures in addition to all the procedures for Level B deprocessing.
LEVEL A
Check for loose or missing plugs in inserts and setscrews in
hull screw holes.
Armor mounting inserts
and screw holes
Hull
(1) Remove shipping tape from heater external exhaust and
intake elbow s.
(2) Remove shipping tape from end of disconnected fuel feed
lin e.
(3) Connect feed line to heater.
Remove shipping tape and intake and exhaust grille cover from
intake and exhaust grille.
Engine air inlet grille
Hull
Hull
Remove and store closure kit.
Fuel system
Closure kit
Hull
Full fuel tank.
Close hull drain plugs.
Drain plugs
Hull
Hull
Squad seats and
backrests
Check for intact seals on handles.
Fire extinguishers
Hull
Remove shipping paper and tape.
(1) Remove plugs from periscope openings.
(2) Remove periscopes from packages and install. See your -20.
Periscopes
Hull
Hull
Install commander’s seat and post on carrier. See your -20.
Commander’s seat and
post
Back to Top
