TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 225 of 785

TM 9-2350-261-34

REPAIR RADIATOR — Continued

0025 00

REPAIR

1.

Re-solder cracked solder joints and splice damaged tubes. If necessary to repair tube damage near end tanks, disassemble

radiator. See R

ODDING

, Steps 1 - 2 .

2.

Tube splicing shall be limited to no more than two tubes adjacent to the core face on either side.

3.

Removed areas of fin shall not exceed 6-1/2 square inches (42 sq cm) per side, per any tube repair. Length of tube splice

shall not exceed 2 inches (5 cm). Tube blockage is not allowed.

4.

Heat solder repair of the upper and lower tanks, side brackets, and inlet and outlet openings is allowed.

5.

Heat soldering of a core shall not exceed a linear length of 8 inches (20 cm) for any one core assembly.

6.

Fin straightening is allowed.

0025 00-4