TM 9-2350-261-34
REPAIR FAN — Continued
0027 00
ASSEMBLY
1.
Install gearbox (7) on support (4). Secure with four screws (12), eight washers (14), and four nuts (13).
2.
Install new packing (11), lock ring (10), and collar (9) on drive shaft (6). Use retaining ring pliers.
3.
Install bearing (5) in housing (3).
4.
Install housing (3) and bearing (5) on drive shaft (6) and collar (9) on bearing.
5.
Position housing (3), bearing (5), and collar (9) against lock ring (10). Tighten setscrew (8).
0027 00-4