TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 235 of 785

TM 9-2350-261-34

REPAIR FAN — Continued

0027 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

11. Apply sealing compound to both sides of washer (12).

1 2.

T IGH T EN N UT (11 ) TO 32 4-3 84

LB

-

IN

( 37-43 N·M) TO RQU E. Use torque wrench .

13. Bend one edge of washer (12) against nut (11) and on edge against fan (13).

14. Install fan housing (5) on support (10). Secure with six screws (6), two screws (7), 16 flat washers (8), and eight new

locknuts (9).

15. Install cover (4) on fan housing (5). Secure with four screws (1), new lockwashers (2), and flat washers (3).

FOLLOW-THROUGH STEPS

1.

Install fan assembly in carrier (see your -20).

END OF TASK

0027 00-6