TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 241 of 785

TM 9-2350-261-34

REPLACE INSTRUMENT PANEL GAUGES AND SWITCHES WIRING

HARNESS — Continued

0028 00

11. Install ground lead (1) and new lockwashers (2) on upper support (3).

12. Install instrument panel (4) with two mounts (5) on support (3). Secure with two screws (6) and flat washers (7).

13. Install panel (4) on two struts (8). Secure with two new locknuts (9), mounts (10) and (11), flat washers (12), and

screws (13).

FOLLOW-THROUGH STEPS

1.

Connect speedometer and tachometer cables to instrument panel gauges (see your -20).

2.

Connect battery negative lead (see your -20).

3.

Turn master switch ON (see your -20).

4.

Drive carrier to check that panel gauges and lights operate properly (see your -10).

5.

Stop/shutdown engine (see your -10).

END OF TASK

0028 00-4