TM-9-2350-261-34
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-261-34 - Page 257 of 785
TM 9-2350-261-34
REPLACE POWER PLANT WIRING HARNESS — Continued
0031 00
11. Connect circuit 1B lead (1) to generator field switch (2) on secondary fuel filter (3).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (see your -20).
2.
Install power plant rear access panel (see your -20).
3.
Start engine (see your -10). Check that power plant wiring harness works correctly.
4.
Raise and lock ramp (see your -10).
5.
Stop/shutdown engine (see your -10).
6.
Close power plant front access door and raise trim vane (see your -10).
7.
Install hull bottom access cover (see your -20).
END OF TASK
0031 00-8
Back to Top
