TM 9-2350-261-34
REPLACE FRONT MAIN WIRING HARNESS — Continued
0032 00
26. Disconnect two connectors (11) from voltage regulator (1).
NOTE
If you need to rem ov e v oltag e reg ulator, d o
Steps 27 - 28
. O therwise, go to Step 2
9
.
27. For 200 amp regulator remove nut (9), lockwasher (8), and ground strap (6) from regulator (1). Discard lockwasher.
28. Remove four screws (4), eight lockwashers (5), and regulator (1) from four weldnuts (7). Discard lockwashers.
29. Remove two clips (3) and harness (2) from two cradles (10) inside driver’s compartment.
0032 00-6