TM 9-2350-261-34
REPLACE FRONT MAIN WIRING HARNESS — Continued
0032 00
3.
Install two bushings (9) on front of hull. Secure with two flat washers (13), four flat washers (12), new lockwashers
(11), and nuts (10).
4.
Install six leads on front main wiring harness (8) through two bushings (9) and bushings (7).
5.
Install harness (8) on two bushings (7) and bushings (9). Secure with two retainers (6), spring washers (5), and nuts (4).
6.
Install six new terminals (1), insulators (2), and connectors (3) on the ends of six leads (8).
7.
Connect circuit 514 lead (17) and circuit 515 lead (18) to left infrared service headlight (19).
8.
Connect circuit 19 lead (15) to blackout headlight (16).
9.
Connect circuit 20 lead (13) to left blackout marker light (14).
10. Connect circuit 17 lead (10) and circuit 18 lead (11) to left service headlight (12).
0032 00-13