TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 275 of 785

TM 9-2350-261-34

REPLACE FRONT MAIN WIRING HARNESS — Continued

0032 00

26. Inside driver’s compartment, install front main wiring harness (2) on two cradles (10). Secure with two cradle clips (3).

CAUTION

Equipment may be damaged if ground strap is not connected to the 200 AMP regulator.

NOTE

If v oltag e reg ulator was rem oved in R EMO VAL Step 28, do INSTAL LATIO N

Steps 27 - 28

.

Otherwise, go to INSTALLATION Step 29.

27. 200 amp regulator only. Install ground strap (6) on regulator. Secure with lockwasher (8) and nut (9).

28. Install voltage regulator (1) on four weldnuts (7). Secure with eight new lockwashers (5) and four screws (4).

29. Connect two connectors (11) to regulator (1).

0032 00-18