TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

  TM-9-2350-261-34 - Page 283 of 785

TM 9-2350-261-34
REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued
0033 00
WARNING
To prevent injury to personnel, verify that all grenades have been removed from smoke grenade
discharger before removing components.
4.
Remove three screws (1) and washers (2) securing smoke grenade discharger (3) to mounting base (4). Pull away
discharger and disconnect wiring harness (5). Remove discharger.
5.
Remove four screws (6), lockwashers (7), and washers (8) securing brush guard (9) to hull. Remove brush guard.
Discard lockwashers.
6.
Remove three screws (10), washers (11), and mounting base (4) from hull.
7.
Disconnect wiring harness (5) from hull connector (12). Remove wiring harness.
8.
Remove jamnut (13) from connector (12) in hull. Let connector fall inside driver’s compartment.
9.
Remove four screws (14), lockwashers (15), washers (16), mounting plate (17), and gasket (18). Discard lockwashers.
0033 00-2


Back to Top