TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 280 of 785

TM 9-2350-261-34

REPLACE FRONT MAIN WIRING HARNESS — Continued

0032 00

46. Connect two circuit 40 leads (9) to instrument panel lights.

47. Connect circuit 452B lead (8) to bilge pump ON light.

48. Connect circuit 452A lead (7) to bilge pump switch.

49. Connect connector (6) to light selector switch.

50. Connect circuit 24 lead (1), circuit 23 lead (2), circuit 22 lead (4), and circuit 21 lead (3) to rear main wiring harness (5).

51. Support instrument panel (4) on two struts (8).

52. Install ground lead (1), two screws (6), flat washer (7), and lockwasher (2) on upper support (3).

53. Install panel (4) with two mounts (5) on upper support (3). Secure with two screws (6).

54. Install panel (4) on two struts (8). Secure with two new locknuts (9), mounts (10) and (11), flat washers (12), and

screws (13).

0032 00-23