TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 287 of 785

TM 9-2350-261-34

REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued

0033 00

25. Remove eight screws (1), lockwashers (2), washers (3), and four protectors (4) from overhead. Discard lockwashers.

26. Disconnect wiring harness lead W8 P5 (5) from cargo hatch closed proximity switch connector A5S3 J1 (6).

27. Remove eleven screws (7), lockwashers (8), washers (9), and clamps (10) from weldnuts overhead. Discard lockwashers.

28. Remove wiring harness (11) from carrier.

INSTALLATION

NOTE

Lay out wiring harness inside carrier.

1.

Connect wiring harness lead W8 P5 (1) to cargo hatch closed proximity switch A5S3 J1 (2).

2.

Connect wiring harness lead W8 P1 (3) to arming/firing unit connector A5A1 J1 (4).

3.

Connect wiring harness lead W8 P3 (5) to cargo hatch full open proximity switch A5S4 J1 (6).

0033 00-6