TM 9-2350-261-34
REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued
0033 00
27. Install gasket (7) and plate (4) on driver’s bulkhead. Secure with four screws (5), eight washers (6), and four new
locknuts (8). Have helper assist.
28. Install connector (1) on plate (4) with jamnut (3).
29. Connect right smoke grenade wiring harness connector (2) to connector (1).
FOLLOW-THROUGH STEPS
1.
Install driver’s level indicator (see your -20).
2.
Install master switch panel (see your -20).
3.
Install turret. See TM 9-2350-259-34.
4.
Close power plant access door (see your -10).
END OF TASK
0033 00-13/14 blank