TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 292 of 785

TM 9-2350-261-34

REPLACE CHASSIS TURRET WIRING HARNESS (M901A1 ONLY) — Continued

0033 00

17. Position plate (17) and gasket (18) on hole on outside of hull. Secure with four screws (14), new lockwashers (15),

and washers (16).

WARNING

To prevent injury to personnel, verify that all grenades have been removed from smoke grenade

discharger before removing components.

18. Hold left smoke grenade wiring harness connector (5) up to plate (17) and secure with jamnut (13). Have helper assist.

19. Connect wiring harness (5) to hull connector (12).

20. Install mounting base (4) on hull. Pass the loose end of the wiring harness (5) through the opening in the base (4).

Secure with three screws (10) and washers (11).

21. Install brush guard (9) on hull. Secure with four screws (6), new lockwashers (7), and washers (8).

22. Position smoke grenade discharger (3) and connect wiring harness (5) to connector on discharger.

23. Install discharger (3) on mounting base (4) and secure with three washers (2) and screws (1).

0033 00-11