TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 598 of 785

TM 9-2350-261-34

REPAIR POWER ENTRY BOX ASSEMBLY A4 (M1068 ONLY) — Continued

0077 00

ASSEMBLY

1.

Install five leads (19), screw (18), new lockwasher (17), nut (16), two washers (15), and wingnut (14) on faceplate (2).

2.

Install cable W13 (13) in EXTERNAL POWER IN hole on faceplate (2) with cap and chain (11) and secure with four

screws (10) and new locknuts (12).

3.

Install cable W14 (9) in AC POWER OUT hole on faceplate (2) with cap and chain (7) and secure with four screws

(6) and new locknuts (8).

4.

Install faceplate (2) on power entry box (5) and secure with six screws (3) and washers (4).

5.

Close and secure lid (1) on power entry box (5).

FOLLOW-THROUGH STEPS

1.

Install power entry box (see your -20).

END OF TASK

0077 00-3/4 blank