TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 588 of 785

TM 9-2350-261-34

INSTALL CARGO HATCH ARMOR SHIELDS (M113A2 ONLY) — Continued

0075 00

NOTE

All dimensions are in inches with metric equivalents.

6.

Measure center points for 12 holes as shown below, six holes on each side of top deck.

7.

Drillholestoamaximumdepthof1-1/4inch(3cm)usingdrillsizesasshownbelow.

8.

Tap six holes (rear) to 1/2-13 UNC-2B, two holes (middle) to 5/8-11 UNC-2B, and four holes (front) to 3/8-16 UNC-2B.

Tap all holes to 7/8 inch (22 mm) minimum depth.

007500-3