TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 586 of 785

TM 9-2350-261-34

INSTALL CARGO HATCH ARMOR SHIELDS (M113A2 ONLY)

0075 00

THIS WORK PACKAGE COVERS:

Installation (page 0075 00-1)

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0104 00, Item 19)

Measuring Tape (WP 0104 00, Item 44)

Portable Electric Drill (WP 0104 00, Item 10)

Portable Electric Drill (WP 0104 00, Item 11)

Screw Threading Set (WP 0104 00, Item 37)

Twist Drill Set (WP 0104 00, Item 50)

Twist Drill Set (WP 0104 00, Item 51)

Materials/Parts

Machine gun shield kit 11660854 (19207)

Personnel Required

Track Vehicle Repairer 63H10

References

See your -10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

INSTALLATION

NOTE

If carrier is equipped with antenna guards on the right side, the forward guard may be a

threeorfourscrewtype.

1.

Remove nine or ten screws (1) and flat washers (2) that secure right front antenna guard (3), right rear antenna guard (4),

and left rear antenna guard (5) on hull top deck. Remove guards. Discard antenna guards and screws. Keep washers.

2.

Plug antenna guard mounting holes with two flat washers under each screw.

007500-1