TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 656 of 785

TM 9-2350-261-34

REPLACE POWER CONTROL ENCLOSURE POWER SUPPLIES (M1068

ONLY) — Continued

0086 00

INSTALLATION

1.

Install four isolators (13), 16 screws (15), and new locknuts (14) in enclosure (16).

2.

Install bracket (12), four new lockwashers (11), and screws (10) on four isolators (13).

3.

Lift power supply (4) into enclosure. Have helper assist. Install circuits 10A and 10B leads with screw (8) on AC

HIGH terminal of power supply (4).

4.

Install circuits 8B and 8C leads with screw (8) on AC LOW terminal of power supply (4).

5.

Install circuit 3Z lead with screw (8) on GND terminal of power supply (4).

6.

Lift power supply (3) into enclosure. Have helper assist. Install circuit 10B lead with screw (6) on AC HIGH terminal of

power supply (3).

7.

Install circuit 8C lead with screw (6) on AC LOW terminal of power supply (3).

8.

Install circuits 3Z and 3Y leads with screw (6) on GND terminal of power supply (3).

008600-3