TM 9-2350-261-34
REPLACE CABLE ASSEMBLIES W117 AND W118 (M1068 ONLY) — Continued
0095 00
INSTALLATION
2.
Connect cable assembly W118 plug P105 (12) to jack J135 (13) on signal patch panel box (14).
3.
Install clamps (9) on cable assembly and secure to weldnuts (10) with screws (8), as required.
4.
Install new tie straps (11) to secure cable assembly, as required.
009500-3
1.
Install cable assembly W118 into carrier, and route cable up through base (15) into external communications box (5).
Have helper assist.