Materials/Tools:
●
Rex. cable. or
TM 9-2350-273-BD
ARMAMENT AND FIRE CONTROL SYSTEMS
strap approximately 40 feet long.
●
Wood block (2" x 4"- 12 inches long).
WARNING
Do not circumvent the safety features when the main gun is ‘lout-of-battery”.
Causing the main gun to fire when “out-of-battery" could result in equipment
damage and injury to personnel.
Procedural Steps:
1. Traverse turret so main gun is forward over driver’s compartment.
2.
Lock turret.
CAUTION
Do not force gun ‘tout-of-battery” more than 12 inches.
3.
Select a tree or
obstacle.
4.
Drive tank very
Components may be damaged.
another tank and drive to a point where main gun tube just touches
slowly forward to force main gun “out-of-battery” 4 to 6 inches.
5.
Reverse tank and quickly back tank away from obstacle.
6. If main gun returns to “battery” position, continue mission. If not, do steps 7
through 11.
7. Guide rope down bore of main gun and out through breech as shown on the next page.
8.
9.
10.
Inside turret, tie rope to 2 x 4.
Place 2 x 4 against breech of main
gun.
Outside tank, tie rope to solid object
such as a tank or tree.
Very slowly back-up tank until main
gun moves to “in-battery” position.
10-13