TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 317 of 889

TM 9-2350-277-10

INSTALL/REMOVE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued

0034 00

2.

Loosen two viewer handles on viewer adapter mount and slide rear cleat by pulling back handle. Tilt plug assembly to

remove from viewer adapter mount in hatch.

3.

Stow plug in Basic Issue Items bag. Stow bag in a suitable place in the vehicle.

4.

Install strap assembly, stowage cover, and entrance window cover on stowage bracket.

FORWARD

CLEATS

VIEWER

HANDLES

REAR

CLEAT

HANDLE

REAR

CLEAT

5.

Check to see that driver’s night vision is in center detent position so that mount assembly is square with the side of the

entrance window housing. If not, rotate it in its mount until it stops in center detent position.

6.

Hold driver’s night vision in an upright position with the window pointing forward and then push entrance window

carefully through viewer adapter mount in hatch.

0034 00-2

Change 3