TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 324 of 889
TM 9-2350-277-10
OPERATE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued
0035 00
8.
Rotate OFF/BRIGHT rotary switch to maximum clockwise bright (ON) position and note that a green image is visible in
the eyepiece.
OFF
ON
DNV POWER SWITCH
LEVEL
TRANS FILTER
TRANS OIL
PARKING
HEADLIGHTS
CLOGGED
LOW PRESS
BRAKE
HI BEAM
MASTER SWITCH ON
TEMP F
RIGHT
FUEL TANK
LEFT
START
IR-BO SELECT
OFF
ON
I.R.
B.O.
BATT GEN
INDICATOR
RPM
HUNDREDS
160
200
120
240
10
20
30
40
50
60
E
F
1/4
1/2
3/4
20
25
30
15
10
5
O
40
35
BILGE PUMPS
OFF
ON
MARKER
LIGHT
UNLOCK
BO
STOP
SER
PANEL
BRIGHT
DIM
DRIVE
PARK
000000
M
ILES
PER
HOU
R
B
A
TT
GENER
ATO
R
TH
DRI
HOUR
10
OFF
ON
BILGE PUMPS ON
DRIVERS FAN
WAIT
GLOW PLUG
D.N.V. POWER
SELECT SWITCH
DRIVING LIGHTS
SWITCH
NOTE
The OFF/BRIGHT rotary switch normally is set to maximum clockwise bright (ON) position
when viewing dim images. However, if the image display is too bright, contrast will be
degraded. Therefore, adjust brightness for best contrast.
9.
Set driver’s night vision in straight-ahead (detent) position for normal driving.
10. When slowly turning carrier or when turning it from a stopped position, driver’s night vision can be rotated out of detent
position by twisting it firmly.
11. If operator normally wears reading glasses, use them while operating driver’s night vision, because image appears 20
inches away which is normal reading distance.
12. If light outside increases, reinstall entrance window protective cover.
CAUTION
Do not open driver’s hatch with vision power connected. The driver’s night vision power cable
is not long enough.
NOTE
Before cleaning entrance window with lens tissue and lens cleaner, gently remove excess dirt
and dust from entrance window.
13. If entrance window becomes rain spotted or dusty, maintain good visibility by first removing driver’s night vision from
carrier mount.
14. Clean entrance window with lens tissue folded into a swab and moistened with lens cleaner, using circular motion.
15. Dry entrance window with a clean dry lens tissue, using circular motion.
16. Move driving lights switch to OFF.
17. Move DNV POWER switch to OFF.
0035 00-3
Change 3
Back to Top
