TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 326 of 889
TM 9-2350-277-10
OPERATE AN/VVS-2(V)1A DRIVER’S NIGHT VISION (ALL EXCEPT M58) — Continued
0035 00
OPERATE DRIVER’S NIGHT VISION WITH 2.7 VOLT BATTERY
1.
Remove entrance window cover and eyepiece protective cap.
2.
Return eyepiece protective cap and entrance window cover to stowage bracket.
STOWAGE
BRACKET
ENTRANCE WINDOW
COVER
DRIVER’S NIGHT
VISION
STRAP
ASSEMBLY
STOWAGE
COVER
3.
Remove driver’s night vision power cable from driver’s night vision.
4.
Connect driver’s night vision power cable to stowage receptacle on master switch panel.
5.
Install power cable receptacle cap on driver’s night vision.
6.
Remove battery compartment cap and insert 2.7 volt battery with recessed end (+) first into battery compartment.
STOWAGE
RECEPTACLE
NIGHT VISION
POWER CABLE
NOTE
The recessed end of the 2.7 volt battery is the positive end (+). Finger-tighten battery
compartment cap securely to ensure firm contact with battery.
7.
Finger tighten battery compartment cap securely to ensure firm contact with 2.7 volt battery.
8.
Adjust driver’s seat for comfortable viewing at eyepiece.
0035 00-5
Change 3
Back to Top
