TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 512 of 889

TM 9-2350-277-10

ASSEMBLY AND PREPARATION FOR USE MORTAR FIRE

CONTROL SYSTEM (MFCS), M95 ONLY

0086 01

THIS WORK PACKAGE COVERS:

Installation of MFCS Equipment (page 0086 01-1).

Emplacing the Mortar on the M1064A3 Carrier (page 0086 01-6)

INITIAL SETUP:

Maintenance Level

Operator

Personnel Required

Gunner

Assistant Gunner

Ammunition Bearer

References

TM 9-1015-250-10

TM 9-1220-248-10

INSTALLATION OF MFCS EQUIPMENT

CAUTION

The Mortar Fire Control System (MFCS) is not intended for ground-mounted use. If mortar is

to be employed in the ground-mounted mode, the pointing device (PD) and the PD mounting

bracket MUST be removed.

To avoid equipment damage, always install dust cover/protective cap on cable and line

replacement unit (LRU) connectors, as necessary.

CAUTION

Ensure power is turned off at power distribution assembly (PDA) before components are

installed, to prevent damage to equipment.

CAUTION

To prevent equipment damage, do not handle computer by cable connecting keyboard to

display area.

NOTE

Perform Steps 1 - 19 prior to mission if commander’s interface (CI), gunner’s display (GD),

pointing device (PD), precision lightweight GPS receiver (PLGR) or defense advanced GPS

receiver (DAGR), and driver’s display (DD) are not in place in M1064A3 carrier.

008601-1

Change 5