TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 517 of 889

TM 9-2350-277-10

ASSEMBLY AND PREPARATION FOR USE MORTAR FIRE CONTROL

SYSTEM (MFCS), M95 ONLY — Continued

0086 01

NOTE

Steps17-19applytoinstallationofdriver’sdisplay(DD)

.

DD may be positioned either on the interior mount in the driver’s compartment or on the

exterior mounting ball. Follow these instructions to install DD to desired position.

17. Loosen T-handle (45) on locking clamp (44) to allow installation of DD (48) on ball on interior mount (43) or exterior

mounting ball (49).

18. Place locking clamp (44) around mounting ball in desired location. Tighten T-handle (45) to secure DD (48).

19. Connect power/data cable (47) to J1 connector (46) on DD (48).

EMPLACING THE MORTAR ON THE M1064A3 CARRIER

1.

Refer to TM 9-1015-250-10.

END OF TASK

0086 01-6

Change 5