TM 9-2350-277-20-1
PERSONNEL HEATER MALFUNCTIONS — Continued
0086 00
FY
1.
Remove heater control box (WP 0702 00).
2.
Check continuity between lead ends of heater output jack (1),
pinA(2)
,andON/OFF/STARTswitchterminal14(3)
.
3.
Does multimeter read 0 ohms?
FYN
1.
Replace faulty lead (WP 0702 00).
2.
Verify no faults found.
F2Y
1.
Replace heater ON/OFF/START switch (WP 0702 00).
2.
Verify no faults found.
GY
1.
Is heater exhaust cold?
GYN
1.
Replace heater (WP 0703 00
or WP 0704 00).
2.
Verify no faults found.
G2Y
1.
Loosen fuel inlet line (1) to heater with heater switch on START.
2.
Does fuel fail to flow out of loosened fitting?
G2YN
1.
Replace heater (WP 0703 00
or WP 0704 00).
2.
Verify no faults found.
008600-9
Change 5